Kugel C-10 IFS Crossmember
Powder Coated Satin Black with Motor Mount Brackets & Hardware $1,200.00
FEATURES
- Bolts into 63-87 Chevrolet C-10 Pickups
- Accepts Any Aftermarket Control Arms & Coil-Over Kits
- Brackets for Flaming River Power Rack (or use stock steering box)
- Gives 2” More Ground Clearance than Stock Crossmember & More Engine Pan Clearance
- Includes Motor Mount Brackets
- Power Coated San Black
- Can be Sold Uncoated/Without Motor Mount Brackets
OPTIONS:
- No Powder Coat – Less $100.00
- No Motor Mount Brackets – Less $150.00
- Factory Motor Mounts for SBC or BBC – Add $50.00
- LS Conversion Plates & Motor Mounts from Energy Suspension – Add $165.00
AFTER MARKET SUSPENSION PARTS AVAILABLE:
- QA1 Upper & Lower A-Arms & Single Adjustable Coil-Over Kit - $2,250.00
-- Complete with Ball Joints, Bushings, Upper Coil-Over & Control Arm Frame Bracket & Hardware, Arms & Brackets Powder Coated Gloss Black. - Double Adjustable Coil-Over – Add $200.00
- QA1 Sway Bar Kit - $440.00
-- 1⅜” Diameter with Brackets, Bushings, Links & Hardware Powder Coated Gloss Black. - Wilwood 2-1/2” Dropped, Forged Aluminum Spindles with Steering Arms & 5 on 4-3/4” or 5 on 5” Bolt Patterns Powder Coated Gloss Black - $820.00
- Wilwood Brake Kit with Black Drilled/Slotted 12.19” Rotors & Black 6 Piston Calipers with Pads - $1,225.00
- Wilwood Brake Kit with Black Drilled/Slotted 13” Rotors & Black 6 Piston Calipers with Pads - $1,985.00
- Wilwood Brake Kit with Black Drilled/Slotted 14” Rotors & Black 6 Piston Calipers with Pads - $2,385.00
- Wilwood Brake Hose Kit - $80.00
- Flaming River Power Rack with Pillow Block Mounts & Rack Fittings - $850.00
- Rack Extenders & Tie-Rod Kit - $150.00
- U-Joints - $140.00/ea
- Steering Shaft - $50.00
- Flaming River V-Dog with Pillow Block Mount - $900.00
*All prices subject to change
Read a step-by-step install of our C-10 IFS in this article by Rob Fortier on Classictruckperformance.com
